PC Engines APU4D2
148.00€ (ex. VAT)
The PC Engines APU4D2 with 2GB RAM system board is a robust platform. With 1 GHz quad-core CPU and AES-NI support, it can be used as high-performance, secure router, firewall or the Internet of Things gateway.
Out of stock
PC Engines APU4D2 Board
The PC Engines APU4D2 with 2GB RAM system board is a robust platform. With 1 GHz quad-core CPU and AES-NI support, it can be used as high-performance, secure router, firewall or the Internet of Things gateway. Device’s capability can be extended by additional mPCIe cards to support other IoT communication protocols, e.g LoRa. With iPXE support, you can easily develop and deploy new solutions for your IoT network.
- CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
- DRAM: 2 or 4 GB DDR3-1333 DRAM
- Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express.
- 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
- Connectivity: 4 Gigabit Ethernet channels (Intel i211AT)
- I/O: DB9 serial port, 2 USB 3.0 external + 2 USB 2.0 internal, three front panel LEDs, pushbutton
- Expansion: 3 miniPCI express (J13 USB or mSATA, apu4*4: with SIM; J14 USB only, with SIM; J15: full miniPCI express, but no SIM, intended for wifi). GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD).
- Board size: 6 x 6″ (152.4 x 152.4 mm) – same as apu1d, alix2d13 and wrap1e.
- Firmware: coreboot open source system BIOS with support for iPXE and USB boot
- Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).